Maxi-Crete is BBA HAPAS approved. It is a unique hot applied, resin based, flexible material especially designed to repair cracks, spalls, pot holes, failed joints, thin bond repairs and most types of defects in concrete pavements to any depth and width. It is the ideal repair for aircraft pavements and major highways and is a fast, very cost effective treatment that reduces the need for full depth repairs.
Maxi-Crete is a grey coloured, pre-mixed blend of resins, polymers and selected aggregates. It is uniquely designed to extend and compress with the expansion and contraction of the pavement. There is no need to reform joints through the finished repair. Due to the special formulated blend, Maxi-Crete produces an impervious, impact resistant, load bearing, highly flexible repair that will withstand vehicle traffic, aircraft movements and varying climate conditions. In most cases Maxi-Crete can accept vehicle and aircraft traffic within 60 minutes of application. Used extensively on most of the UK’s international airports, motorways and military airfields, Maxi-Crete will limit the damaging effects of water ingress and improve the riding quality of the concrete surface. The system is laid at a nominal depth of 20mm for highway applications and 40mm for airfield applications in lifts of 20mm until flush with the adjacent surface. Should the depth of repair exceed 40mm Maxi-Crete 40 should be considered as an infill material in combination with Maxi-Crete 20.